MTF confirmation · Fisher
Higher-timeframe confirmation conditions for Fisher: when your entry strategy gives a signal, the bot checks that this condition also holds on the higher timeframe you chose.
Conditions
MTF · Fisher Above
What exactly does this condition ask?
On the last candle of your chosen timeframe, the blue Fisher line must be above the red Trigger line — direction up. No crossover is expected; being above at that moment is enough.
Which settings does it read?
When selected, only the StdDev cell opens in the table (default 0.25). If the small checkbox before it is checked, the bot also checks strength: the difference between Fisher and Trigger must be greater than the multiple you entered of the last 20 candles' fluctuation measure — weak differences are filtered out. If the checkbox is unchecked, only the ordering is asked.
How do you use it?
At entry you picked DI+ crossed 50 upward · RSI above 60 · MACD above zero on 5m; on MTF you picked Fisher Above — 4h · EMA trend up (2h) · DMI above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a buy order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin rising on 5m but falling on 4h usually has a small and temporary rise.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Fisher Below
What exactly does this condition ask?
On the last candle of your chosen timeframe, the blue Fisher line must be below the red Trigger line — direction down. No crossover is expected; being below at that moment is enough.
Which settings does it read?
When selected, only the StdDev cell opens in the table (default 0.25). If the small checkbox before it is checked, the bot also checks strength: the difference between Fisher and Trigger must be greater than the multiple you entered of the last 20 candles' fluctuation measure — weak differences are filtered out. If the checkbox is unchecked, only the ordering is asked.
How do you use it?
At entry you picked DI− crossed 50 upward · RSI below 40 · MACD below zero on 5m; on MTF you picked Fisher Below — 4h · EMA trend down (2h) · DI− above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a sell (SHORT) order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin falling on 5m but rising on 4h usually has a small and temporary fall.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Fisher Falling
What exactly does this condition ask?
On your chosen timeframe, Fisher must be lower than the previous candle on every one of the last 2 candles (you decide). Trigger isn't checked; only Fisher's own direction. You set this window (candle count) yourself.
Which settings does it read?
When selected, only the Candle Count cell opens in the table (2 in the panel): how many candles it must sustain without interruption. Enter 1 and only the last candle is compared to the previous; increasing it requires a more settled move, opening the gate less often.
How do you use it?
At entry you picked DI− crossed 50 upward · RSI below 40 · MACD below zero on 5m; on MTF you picked Fisher Falling — 4h · EMA trend down (2h) · DI− above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a sell (SHORT) order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin falling on 5m but rising on 4h usually has a small and temporary fall.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Near Bottom (LONG)
What exactly does this condition ask?
On your chosen timeframe, Fisher must have dropped below its own normal fluctuation: the fluctuation measure (standard deviation) of the last 20 candles is calculated, and if Fisher is below the negative value of that, it's counted as at the bottom — a "cheap zone" confirmation for LONG.
Which settings does it read?
There's no cell that opens for this row in the table; checking it is enough. The rule looks at that timeframe's last candle, it doesn't read a box.
How do you use it?
At entry you picked DI+ crossed 50 upward · RSI above 60 · MACD above zero on 5m; on MTF you picked Near Bottom — 4h · EMA trend up (2h) · DMI above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a buy order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin rising on 5m but falling on 4h usually has a small and temporary rise.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Near Top (SHORT)
What exactly does this condition ask?
On your chosen timeframe, Fisher must have risen above its own normal fluctuation: the fluctuation measure of the last 20 candles is calculated, and if Fisher is above it, it's counted as at the top — an "expensive zone" confirmation for SHORT.
Which settings does it read?
There's no cell that opens for this row in the table; checking it is enough. The rule looks at that timeframe's last candle, it doesn't read a box.
How do you use it?
At entry you picked DI− crossed 50 upward · RSI below 40 · MACD below zero on 5m; on MTF you picked Near Top — 4h · EMA trend down (2h) · DI− above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a sell (SHORT) order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin falling on 5m but rising on 4h usually has a small and temporary fall.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Not at Bottom (SHORT)
What exactly does this condition ask?
On your chosen timeframe, Fisher must not have dropped below the lower bound of its own normal fluctuation: the fluctuation measure of the last 20 candles is calculated, and if Fisher is above the negative value of that, it's counted as not at the bottom — reduces the risk of selling at the bottom in SHORT.
Which settings does it read?
There's no cell that opens for this row in the table; checking it is enough. The rule looks at that timeframe's last candle, it doesn't read a box.
How do you use it?
At entry you picked DI− crossed 50 upward · RSI below 40 · MACD below zero on 5m; on MTF you picked Not at Bottom — 4h · EMA trend down (2h) · DI− above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a sell (SHORT) order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin falling on 5m but rising on 4h usually has a small and temporary fall.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Not at Top (LONG)
What exactly does this condition ask?
On your chosen timeframe, Fisher must not have exceeded the upper bound of its own normal fluctuation: the fluctuation measure of the last 20 candles is calculated, and if Fisher is below it, it's counted as not at the top — reduces the risk of buying at the top in LONG.
Which settings does it read?
There's no cell that opens for this row in the table; checking it is enough. The rule looks at that timeframe's last candle, it doesn't read a box.
How do you use it?
At entry you picked DI+ crossed 50 upward · RSI above 60 · MACD above zero on 5m; on MTF you picked Not at Top — 4h · EMA trend up (2h) · DMI above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a buy order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin rising on 5m but falling on 4h usually has a small and temporary rise.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
MTF · Fisher Rising
What exactly does this condition ask?
On your chosen timeframe, Fisher must be higher than the previous candle on every one of the last 2 candles (you decide). Trigger isn't checked; only Fisher's own direction. You set this window (candle count) yourself.
Which settings does it read?
When selected, only the Candle Count cell opens in the table (2 in the panel): how many candles it must sustain without interruption. Enter 1 and only the last candle is compared to the previous; increasing it requires a more settled move, opening the gate less often.
How do you use it?
At entry you picked DI+ crossed 50 upward · RSI above 60 · MACD above zero on 5m; on MTF you picked Fisher Rising — 4h · EMA trend up (2h) · DMI above (12h). 10 coins passed the entry on 5m; 4 were filtered out on 2h, 5 were filtered out on this rule on 4h, and 1 coin passed all of them — the bot sent a buy order only for that one. There's no limit, you build the combination: more selections give a rare but consistent alert, fewer selections give a frequent but low-accuracy one — a coin rising on 5m but falling on 4h usually has a small and temporary rise.
What is MTF confirmation?
When your entry strategy gives a signal on a coin, the bot doesn't buy right away; it first checks the rules you selected here. It checks each rule on its own timeframe: you can select multiple timeframes and multiple indicators, and all of them must hold at the same time. If only 2 of the 10 coins that passed the entry strategy also pass all the MTF rules, the bot only buys those 2 coins. MTF never opens a trade on its own; it only filters.
Does this condition close the position?
It only has a say at entry; even if the higher timeframe reverses after the position opens, it doesn't close it. What closes it is your choice: if Profit Lock is on, PNL tracking takes over (while it's on, the Trailing Stop, Take Profit Net, Limit Take Profit Net boxes are locked); if it's off, the numbers you entered in these three are placed as orders on Binance and the position closes from there. DCA Rescuer and Liquidation Shield kick in under their own conditions; and you can always close from the panel with CLOSE or manually from Binance.
